Tips on the Use of Hydraulic Rubber Hose

Due to the complex variety of hose, diverse structure, and different conditions of use, the service life of the hose is not only determined by the quality, but also by the correct use and maintenance. Therefore, even if the product has a very high quality, if it is not properly used and maintained, it will seriously affect its service quality and life, and even cause serious accidents that should not be caused to property Loss. 

Hereby we kindly provide the following Tips for attention:

1.The hose and hose assembly can only be used to transport the designed material, otherwise it will reduce the service life or failure.

2.Ensure that the length of the hose is used, and the length of the hose changes under high pressure (-4%-+2%) and the length change caused by mechanical movement.

3.The hose and hose assembly should not be used in excess of the design working pressure (including impact pressure).

4.The hose and hose assembly delivered by the medium temperature is not normal, should not exceed -40℃-+120℃, otherwise it will reduce the service life.

5.The hose and hose assembly should not be used less than the minimum bending radius of the hose, to avoid bending or bending near the pipe joint, otherwise it will hinder the hydraulic transmission and delivery of materials or damage the hose assembly.

6.The hose and hose assembly, should not be used in the state of torsion.

7.The hose and hose assembly should be handled carefully, should not be dragged on sharp and rough surfaces, should not be bent and flattened.

8.The hose and hose assembly should be kept clean, the inside should be washed ten clean (especially acid pipe, spray pipe, mortar pipe). Prevent foreign objects from entering the cavity, impeding fluid delivery, and damaging the equipment.

9.Exceed the service period or storage period of the hose and hose assembly to be tested and identified before continuing to use.